Wall switch 1 groups

The 1-group smart wall button is a multi-purpose button that can control up to 16 smart devices at the same time. By pressing the UP and DOWN keys, you can send switching commands to your smart devices. The red/green status LEDs indicate whether all smart devices have received and confirmed the signal. Thanks to its intelligent control design, the radio button automatically recognises the type of device registered and automatically sends the appropriate radio signal to the smart device. The wall button also has a number of practical functions, such as pulse operation that can be activated for adjustable venetian blinds and rotation direction reversal for roller blind motors. The wall button has a discreet white design. In addition, a black centre bar is included, allowing you to change the design.This wall-mounted button is very practical if you want to add a control in a specific place. Every night, you have the same problem. No switch at the foot of your bed to turn off the light in your room? With a connected receiver and our connected wall button, you'll soon have the solution.The wall button can be easily installed using glue or screws, and is surface-mounted, sitting extremely flat to the wall. As no flush-mounted back-box is required, you have a great deal of flexibility when selecting a location. After removing the separating film from the battery compartment, the button is ready for use. Thanks to its 50 x 50 mm dimensions, you can integrate the switch into any existing switch setup. Depending on the switch setup used, a 50 x 50 intermediate frame (meeting DIN 49075) may be required. The wall button is versatile and can be used equally for stand-alone solutions and for additional control via an app, in combination with the premium smart home hub. This means that you can register and control your smart devices using the wall button, but you can also use it in combination with the premium smart home hub to control devices via an app.